Transition Extension

Transition Pre and Post Extension

vacuum_hose_adapter transitionext_demo
Add a straight extension of the desired length before at the start or end of the transition. This can be used with all of the adapter types, and is helpful for connectors that don’t allow you to change the length, I.E. Centec, DW735, nozzle and so on.
The extension also supports adding a grid mesh. This is might be helpful in preventing large pieces being sucked in to fan blades.

Setting	Description
`Transition_Pre_Length`	Defines in mm the length of the pre transition extension.
`Transition_Pre_GridSize`	Defines in mm the size of the grid mesh. Both the `GridSize`. `Default is connectorInnerDiameter/6`.
`Transition_Pre_GridWallThickness`	Defines in mm the grid wall thickness, can’t be greater than then length. If value is 0 the grid wont be rendered.
`Transition_Post_Length`	Defines in mm the length of the pre transition extension.
`Transition_Post_GridSize`	Defines in mm the size of the grid mesh. Both the `GridSize`. `Default is connectorInnerDiameter/6`.
`Transition_Post_GridWallThickness`	Defines in mm the grid wall thickness, can’t be greater than then length. If value is 0 the grid wont be rendered.