Connectors
There are currently 8 types of connectors, each can be use as End 1 or End 2. Each connector type has settings that are only relevant to that specific connectors. Some connectors have no configurable settings.
Common settings
Common settings for all connectors. Some settings will be overridden by specific connectors. I.E. Dyson V5 has a fixed size.
Options
| Setting | Description |
|---|---|
End_Style | The style of the end options - hose, Hose connector (configurable)- flange, Flange (configurable)- mag, Magnetic Flange (configurable)- nozzle, Nozzle (configurable)- camlock, Camlock connector (fixed)- centec, Centec connector (fixed)- dyson, Dyson connector (fixed)- dw735, Dewalt 735 connector (fixed) |
End_Measurement |  Is the measurement the adapter’s outside or inside diameter? options - inner, Inner adapter measurement- outer, Outer adapter measurement.Only applies to configurable styles, hose, flange, mag nozzle. |
End_Wall_Thickness |  Wall thickness default=2.Only applies to configurable styles, hose, flange, mag nozzle. |
End_Diameter |  Diameter of the adapter (mm). Only applies to configurable styles, hose, flange, mag nozzle. |
End_Length |  Length of the connector (including the flange). Only applies to configurable styles, hose, flange, mag nozzle. |
End_Taper |  Taper of the connector, use negative to taper other direction. Only applies to configurable styles, hose, flange, mag nozzle. |
End_Rotation |  Rotation in deg of the connector. This is useful when the connector is not symmetrical (nozzle, dw735, dyson). Applies to styles. |
other
| Setting | Description |
|---|---|
Enable_Debug_Slice | Slice model in half to be able to easy see inside |
Enable_Calipers_Slice | Show the measurement calipers, most useful with Debug_Slice enabled. |
Enable_Help | Outputs help to the console. |